15.4.2019  Düsseldorf / Germany

New one-part cure-in-place TIMs, low-volatility liquid gap fillers and presentations from thought leaders showcase company’s power application expertise

Henkel to launch novel thermal and solder material solutions at PCIM Europe 2019

At the PCIM Europe event taking place May 7-9 in Nuremberg, Henkel will launch new liquid-dispensed, low-outgassing and one-part thermal interface materials (TIMs) designed for high-power industrial automation, automotive power conversion and automotive advanced driver-assistance systems (ADAS) applications. Also making its European debut is Henkel’s novel temperature stable Loctite GC 18 low-voiding solder paste formulated to minimize voids and increase reliability across a wide component range. As part of the Exhibitor Forum and conference program, in-depth discussions of application criteria and material specifics will be offered through a series of papers and presentations by Henkel technical specialists.

Thermal Management and Low-voiding Interconnect Materials

One-part, cure-in-place TIMs – Henkel has developed two new, one-part, cure-in-place thermal management materials to address the requirements for simplified processing and eliminate the concerns around dispensing speed with pre-cured, one-part gels.  The first, a Bergquist Liqui Form material, has a thermal conductivity of 3.5 W/m-K and, once dispensed, cures at room temperature. This material is ideal for applications that require fast and easy processing, low assembly stress and a robust final cured modulus for lifetime gap stability. With a thermal conductivity of 4.5 W/m-K, the second one-part TIM is a silicone-free Bergquist Gap Filler moisture-cure material designed for applications where silicone is a concern (for example, optical systems in ADAS, industrial automation drives, and PLCs) and high-temperature stability of up to 150°C is required.

Low-volatility liquid gap fillers – Delivering robust thermal conductivity and the mechanical property benefits of silicone, Henkel’s Bergquist Gap Filler TGF 1500LVO and Bergquist Gap Filler TGF 3500LVO cure-in-place TIMs are low-volatility formulations designed to ensure outgassing is minimized. The two-part materials, with 1.8 W/m-K and 3.5 W/m-K thermal conductivity, respectively, are well-suited for high-throughput operations where automated application is beneficial.  As liquid mediums, the materials are conducive to miniaturized, intricate designs and can flow in and around tight spaces to ensure excellent gap filling at the interface for optimal heat dissipation.

Low-voiding, temperature stable solder paste and high reliability alloy – Adding to its line of award-winning Loctite GC temperature stable solder pastes, Henkel has developed a low-voiding formulation compatible with multiple component sizes including large, thermally-challenged devices such as MOSFETs and QFNs, which are often integrated into power and automotive control applications. Like all Loctite GC materials, Loctite GC 18 offers stability in transit, in storage, and on the production line for the lowest cost-of-ownership and excellent performance and reliability across a wide spectrum of product builds.   In addition, the company’s high reliability 90iSC lead-free solder alloy will be on show.  Designed in cooperation with automotive manufacturers, Henkel’s 90iSC has been formulated to withstand the demands of harsh environments, delivering high operating temperature stability beyond that of conventional SAC alloys.

Learn from Henkel Subject Matter Experts

Henkel’s team of technical specialists will expand on the benefits of the above materials in a series of three presentations taking place throughout the three-day PCIM Europe event.  

  • Silicone vs. Silicone-free Thermally-conductive Materials by Henkel Technical Customer Service Engineer, Giuseppe Caramella, on May 7 at 11:40 in the Exhibitor Forum:  This presentation discusses the benefits of each chemistry platform, operating conditions, restrictions, and outgassing requirements.
  • Next-generation, One-component Cure-in-place Thermally-conductive Gap Filler on May 8 at 4:20 p.m. in the Exhibitor Forum is presented by Stephan Höfer, Henkel EIMEA Business Development Manager for Powertrain and Power Conversion. The presentation will cover the difference of pre-cured gels and the value proposition for using a one-component, cure-in-place, vertically-stable Liqui Form material.
  • The Influence of Solder Paste Formulation and Process Factors on Large QFN Material Voiding by Rodrigo Aguilar, Henkel Business Development Manager, will cover information on the current voiding standards and discuss solder material and process factors that influence voiding. The presentation, taking place on May 7th at 15:15, will be part of the poster sessions at the Foyer Ground NCC Mitte.

To learn more about Henkel’s latest innovations, visit the team in PCIM Europe booth 7500. Additional details regarding Henkel’s full scope of materials for industrial automation and automotive applications can be found here:
www.henkel-adhesives.com/electronics.

Thermal Management Solutions – high performance, thermally conductive liquid gap fillers, ensure excellent gap filling at the interface for optimal heat dissipation.

Solder Material Solutions – enabling excellent performance and reliability across a wide spectrum of product builds.

Sebastian Hinz Henkel Adhesive Technologies Media Relations Headquarters, Düsseldorf/Germany +49-211-797-8594 press@henkel.com Lataa käyntikortti Lisää Oma sivukokoelmani

Like it? Share it!